Есть ли аналог Windows To Go для личного использования?

Before you begin:

There are a few things that you need to take into consideration when doing something like this. The first and foremost being what medium and connection are you planning on using to create and run this portable OS. My recommendation is to use AT LEAST USB 3.0 or eSATA. The use of USB 3.0 SSD's (yes there is a difference) is also highly recommended with these specific models:

• Kingston Technology 32GB Data Traveller Ultimate USB Flash Drive Mfr # KW-U4132-1FA
• SuperTalent 25GB USB 3.0 Express RC8 Flash Drive Mfr # ST3U25GR8S
• SuperTalent 50GB USB 3.0 Express RC8 Flash Drive Mfr # ST3U50GR8S
• SuperTalent 100GB USB 3.0 Express RC8 Flash Drive Mfr # ST3U100R8S

Note: I used a USB 2.0 flash drive drive, and got this to work, but it took forever (11 hours) to setup and forever to bootup. (several minutes)

Also you'll need a Windows 8 Installation .iso file

Getting started

1. You need to format your drive as a NTFS drive.

   • Go to "Disk Management" and right click on the flash drive.
   • Select "Format..."
   • Make sure to Select NTFS as the File System and a quick format is ok to run:

2. Mount the Windows 8 Installation disk by double clicking on the .iso file.

3. From an Administrative Windows PowerShell, run the following command (you have to use PowerShell as CMD doesn't work even with Admin rights):

   dism /Apply-Image /ImageFile:<path to install.wim> /ApplyDir:<USB Drive Letter> /Index:<image_index (1 for Pro, 2 for Core)> /CheckIntegrity /Verify

   You'll get a screen like the following:

   

   WARNING: If you are using a USB 2.0 port or drive, this can take multiple hours to perform. It took 11 hours for me.

4. Run the next following command:

   bcdboot.exe <drive letter of flash drive>:\windows /s <drive letter of flash drive>: /f ALL

You're Done!

Again unless you're using USB 3.0 or another equivalent medium in speed, don't expect this to boot up right away. But you should be able to enjoy a fully operable portable Window 8 Experience.

Create Windows To Go on any edition of Windows 8:

Best to use a Windows 8 PC to build the usb to go.

From the article:

"It is possible to use Windows 7 to create your Windows 8 To Go USB device. You will just need some additional software. "

1. Launch an administrative level command prompt.

2. Make sure that your USB Drive is plugged in and then type in diskpart and hit Enter.

3. List the available disks by running list disk and you should see your usb device.

4. Select your USB drive by typing select disk # and hit Enter. For example, select disk 3.

5. Clean the partitions on the disk by typing clean and hit Enter.

6. Now create the boot partition by running the following command:

   create partition primary size=350

7. Now create the OS partition by running the following command to create a partition taking up all remaining space:

   create partition primary

8. The boot partition needs to be formatted, configured and assigned a drive letter, run the following commands:

   select partition 1
format fs=fat32 quick
active
assign letter=b

   If the b drive letter is already in use on your PC, substitute a different letter and replace b with your letter throughout the rest of this guide.

9. The same must be done for the OS partition, run the following different commands:

   select partition 2
format fs=ntfs quick
assign letter=o

   If the o drive letter is already in use on your PC, substitute a different letter and replace o with your letter throughout the rest of this guide

10. Exit Diskpart by typing Exit.

11. Extract the install.wim file from the *\sources* directory of the Windows 8 install ISO to *c:\wim*. On Windows 8 you can just double click an ISO to mount and then browse it.

12. Use DISM to deploy the Windows 8 files to the OS partition of the USB device by running:

    dism /apply-image /imagefile:c:\wim\install.wim /index:1 /applydir:o:\

13. The boot manager needs to be installed on the boot partition with the help of the bcdboot utility. Run the following command:

    o:\windows\system32\bcdboot o:\windows /f ALL /s b:

14. Reboot your computer and test your new Windows 8 To Go device built on Windows 8. Make sure the PC is configured to boot to USB before your local hard drive.

Source of Information