Как подключить гарнитуру по умолчанию в pulseaudio

Всякий раз, когда я подключаю свою USB-гарнитуру pulseaudio, определяемую как «отключенную», это не является критической проблемой, но раздражает необходимость включения вручную.

Так как же сделать так, чтобы гарнитура автоматически обнаруживалась «подключенной»?

Мои устройства:

[sergio@newhope ~]$ aplay --list-devices **** List of PLAYBACK Hardware Devices **** card 0: PCH [HDA Intel PCH], device 0: 92HD91BXX Analog [92HD91BXX Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: PCH [HDA Intel PCH], device 3: HDMI 0 [HDMI 0] Subdevices: 1/1 Subdevice #0: subdevice #0 card 1: Headset [Logitech USB Headset], device 0: USB Audio [USB Audio] Subdevices: 1/1 Subdevice #0: subdevice #0 [sergio@newhope ~]$ aplay --list-devices **** List of PLAYBACK Hardware Devices **** card 0: PCH [HDA Intel PCH], device 0: 92HD91BXX Analog [92HD91BXX Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: PCH [HDA Intel PCH], device 3: HDMI 0 [HDMI 0] Subdevices: 1/1 Subdevice #0: subdevice #0 card 1: Headset [Logitech USB Headset], device 0: USB Audio [USB Audio] Subdevices: 1/1 Subdevice #0: subdevice #0 

И раковины:

[sergio@newhope ~]$ pacmd list-sinks  1 sink(s) available. * index: 0 name: <alsa_output.pci-0000_00_1b.0.analog-stereo> driver: <module-alsa-card.c> flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY FLAT_VOLUME DYNAMIC_LATENCY state: SUSPENDED suspend cause: IDLE  priority: 9959 volume: front-left: 65536 / 100% / 0,00 dB, front-right: 65536 / 100% / 0,00 dB balance 0,00 base volume: 65536 / 100% / 0,00 dB volume steps: 65537 muted: no current latency: 0,00 ms max request: 0 KiB max rewind: 0 KiB monitor source: 0 sample spec: s16le 2ch 44100Hz channel map: front-left,front-right Estéreo used by: 0 linked by: 0 configured latency: 0,00 ms; range is 0,50 .. 2000,00 ms card: 1 <alsa_card.pci-0000_00_1b.0> module: 7 properties: alsa.resolution_bits = "16" device.api = "alsa" device.class = "sound" alsa.class = "generic" alsa.subclass = "generic-mix" alsa.name = "92HD91BXX Analog" alsa.id = "92HD91BXX Analog" alsa.subdevice = "0" alsa.subdevice_name = "subdevice #0" alsa.device = "0" alsa.card = "0" alsa.card_name = "HDA Intel PCH" alsa.long_card_name = "HDA Intel PCH at 0xf7e10000 irq 30" alsa.driver_name = "snd_hda_intel" device.bus_path = "pci-0000:00:1b.0" sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card0" device.bus = "pci" device.vendor.id = "8086" device.vendor.name = "Intel Corporation" device.product.id = "1e20" device.product.name = "7 Series/C210 Series Chipset Family High Definition Audio Controller" device.form_factor = "internal" device.string = "front:0" device.buffering.buffer_size = "352800" device.buffering.fragment_size = "176400" device.access_mode = "mmap+timer" device.profile.name = "analog-stereo" device.profile.description = "Estéreo Analógico" device.description = "Audio Interno Estéreo Analógico" alsa.mixer_name = "Intel PantherPoint HDMI" alsa.components = "HDA:111d76e0,1028057e,00100102 HDA:80862806,80860101,00100000" module-udev-detect.discovered = "1" device.icon_name = "audio-card-pci" ports: analog-output-speaker: Speakers (priority 10000, latency offset 0 usec, available: unknown) properties: device.icon_name = "audio-speakers" analog-output-headphones: Auriculares analógicos (priority 9000, latency offset 0 usec, available: no) properties: device.icon_name = "audio-headphones" active port: <analog-output-speaker> 

Я пробовал пару вещей, таких как:

pactl load-module module-switch-on-connect

Но безуспешно, я использую Fedora 21.