ezbook 2 не заряжается при загрузке ОС (Fedora)

Я купил ezbook 2 и установил Fedora 28. К сожалению, у меня проблемы с батареей (INT33F4).

В частности, я не могу заряжать свой ноутбук с работающей Fedora. Индикатор зарядки мигает красным, независимо от того, подключено ли зарядное устройство переменного тока или нет. Я могу заряжать аккумулятор только при полностью выключенном компьютере, и он ведет себя нормально (красный стабильный светодиод при зарядке, не горит при полной зарядке).

После прочтения некоторых тем об этом https://patchwork.kernel.org/patch/9687331/ https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=895129 оказалось, что его поддержка быть доступным в ядре 4.18 (в настоящее время только в сыром виде Fedora), поэтому я обновил свое ядро ​​и установил драйверы axp288_fuel_gaugeи axp288_charger. После перезагрузки ничего нового не произошло, и батарея все еще не заряжается при загрузке Fedora.

Я также пытался установить tlpбезуспешно (та же ситуация, что и раньше).

Кто-то испытывал такую ​​же ситуацию? Что я могу сделать дальше, чтобы иметь возможность заряжать свой ноутбук во время работы с ним? Большое спасибо.

Я предоставляю здесь вывод некоторых команд, когда батарея должна заряжаться (подключен переменный ток):

# inxi -Fxz System: Host: idefix Kernel: 4.18.0-0.rc6.git2.1.fc29.x86_64 x86_64 bits: 64 compiler: gcc  v: 8.1.1 Console: N/A Distro: Fedora release 28 (Twenty Eight)  Machine: Type: Desktop System: Jumper product: EZbook v: N/A serial: N/A  Mobo: AMI model: Cherry Trail CR serial: N/A UEFI: American Megatrends v: 5.11  date: 11/29/2017  Battery: Device-1: axp288_fuel_gauge model: N/A charge: 82% status: Charging  CPU: Topology: Quad Core model: Intel Atom x5-Z8350 bits: 64 type: MCP arch: Airmont rev: 4  L2 cache: 1024 KiB  flags: lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx bogomips: 11520  Speed: 480 MHz min/max: 480/1920 MHz Core speeds (MHz): 1: 480 2: 480 3: 836 4: 948  Graphics: Card-1: Intel Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series PCI  Configuration Registers  driver: i915 v: kernel bus ID: 00:02.0  Display: server: X.org 1.19.6 driver: i915 tty: 104x53  Message: Advanced graphics data unavailable for root. Old System?  Audio: Card-1: Intel HDMI/DP LPE Audio driver: HdmiLpeAudio message: bus/chip ids unavailable  Card-2: bytcr-rt5651 driver: bytcr-rt5651 message: bus/chip ids unavailable  Sound Server: ALSA v: k4.18.0-0.rc6.git2.1.fc29.x86_64  Network: Message: No PCI card data found.  IF-ID-1: wlan0 state: up mac: <filter>  Drives: Local Storage: total: 58.24 GiB used: 8.23 GiB (14.1%)  ID-1: /dev/mmcblk0 model: CJNB4R size: 58.24 GiB  Partition: ID-1: / size: 57.04 GiB used: 8.03 GiB (14.1%) fs: btrfs dev: /dev/dm-0  ID-2: /boot size: 975.9 MiB used: 196.1 MiB (20.1%) fs: ext4 dev: /dev/mmcblk0p2  ID-3: /home size: 57.04 GiB used: 8.03 GiB (14.1%) fs: btrfs dev: /dev/dm-0  Sensors: System Temperatures: cpu: 58.0 C mobo: N/A  Fan Speeds (RPM): N/A  Info: Processes: 307 Uptime: 38m Memory: 3.75 GiB used: 1.54 GiB (41.0%) Init: systemd  runlevel: 5 Compilers: gcc: 8.1.1 Shell: bash v: 4.4.23 inxi: 3.0.17  # lsmod | grep axp axp288_fuel_gauge 20480 0 axp288_adc 16384 0 extcon_axp288 16384 0 industrialio 81920 2 axp288_adc,axp288_fuel_gauge axp288_charger 20480 0 axp20x_pek 16384 0 roles 16384 2 extcon_axp288,intel_xhci_usb_role_switch # tlp-stat --- TLP 1.1 --------------------------------------------  +++ Configured Settings: /etc/default/tlp TLP_ENABLE=1 TLP_DEFAULT_MODE=BAT TLP_PERSISTENT_DEFAULT=0 DISK_IDLE_SECS_ON_AC=0 DISK_IDLE_SECS_ON_BAT=2 MAX_LOST_WORK_SECS_ON_AC=15 MAX_LOST_WORK_SECS_ON_BAT=60 CPU_HWP_ON_AC=balance_performance CPU_HWP_ON_BAT=power SCHED_POWERSAVE_ON_AC=0 SCHED_POWERSAVE_ON_BAT=1 NMI_WATCHDOG=0 ENERGY_PERF_POLICY_ON_AC=performance ENERGY_PERF_POLICY_ON_BAT=power DISK_DEVICES="sda sdb" DISK_APM_LEVEL_ON_AC="254 254" DISK_APM_LEVEL_ON_BAT="128 128" SATA_LINKPWR_ON_AC="med_power_with_dipm max_performance" SATA_LINKPWR_ON_BAT="med_power_with_dipm max_performance" AHCI_RUNTIME_PM_TIMEOUT=15 PCIE_ASPM_ON_AC=performance PCIE_ASPM_ON_BAT=powersave RADEON_POWER_PROFILE_ON_AC=high RADEON_POWER_PROFILE_ON_BAT=low RADEON_DPM_STATE_ON_AC=performance RADEON_DPM_STATE_ON_BAT=battery RADEON_DPM_PERF_LEVEL_ON_AC=auto RADEON_DPM_PERF_LEVEL_ON_BAT=auto WIFI_PWR_ON_AC=off WIFI_PWR_ON_BAT=on WOL_DISABLE=Y SOUND_POWER_SAVE_ON_AC=0 SOUND_POWER_SAVE_ON_BAT=1 SOUND_POWER_SAVE_CONTROLLER=Y BAY_POWEROFF_ON_AC=0 BAY_POWEROFF_ON_BAT=0 BAY_DEVICE="sr0" RUNTIME_PM_ON_AC=on RUNTIME_PM_ON_BAT=auto USB_AUTOSUSPEND=1 USB_BLACKLIST_BTUSB=0 USB_BLACKLIST_PHONE=0 USB_BLACKLIST_PRINTER=1 USB_BLACKLIST_WWAN=1 RESTORE_DEVICE_STATE_ON_STARTUP=0  +++ System Info System = Jumper Default string EZbook BIOS = 5.11 Release = "Fedora release 28 (Twenty Eight)" Kernel = 4.18.0-0.rc6.git2.1.fc29.x86_64 #1 SMP Thu Jul 26 14:28:43 UTC 2018 x86_64 /proc/cmdline = BOOT_IMAGE=/vmlinuz-4.18.0-0.rc6.git2.1.fc29.x86_64 root=UUID=7c62df58-1e5d-46e7-8ea9-61ae0a7948f1 ro rootflags=subvol=root rd.luks.uuid=luks-7ebf8d83-0bb2-474a-8054-464040954efc quiet Init system = systemd  Boot mode = UEFI  +++ TLP Status State = enabled Last run = 13:58:55, 2 sec(s) ago Mode = battery Power source = battery  +++ Processor CPU model = Intel(R) Atom(TM) x5-Z8350 CPU @ 1.44GHz  /sys/devices/system/cpu/cpu0/cpufreq/scaling_driver = intel_pstate /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor = powersave /sys/devices/system/cpu/cpu0/cpufreq/scaling_available_governors = performance powersave /sys/devices/system/cpu/cpu0/cpufreq/scaling_min_freq = 480000 [kHz] /sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq = 1920000 [kHz]  /sys/devices/system/cpu/cpu1/cpufreq/scaling_driver = intel_pstate /sys/devices/system/cpu/cpu1/cpufreq/scaling_governor = powersave /sys/devices/system/cpu/cpu1/cpufreq/scaling_available_governors = performance powersave /sys/devices/system/cpu/cpu1/cpufreq/scaling_min_freq = 480000 [kHz] /sys/devices/system/cpu/cpu1/cpufreq/scaling_max_freq = 1920000 [kHz]  /sys/devices/system/cpu/cpu2/cpufreq/scaling_driver = intel_pstate /sys/devices/system/cpu/cpu2/cpufreq/scaling_governor = powersave /sys/devices/system/cpu/cpu2/cpufreq/scaling_available_governors = performance powersave /sys/devices/system/cpu/cpu2/cpufreq/scaling_min_freq = 480000 [kHz] /sys/devices/system/cpu/cpu2/cpufreq/scaling_max_freq = 1920000 [kHz]  /sys/devices/system/cpu/cpu3/cpufreq/scaling_driver = intel_pstate /sys/devices/system/cpu/cpu3/cpufreq/scaling_governor = powersave /sys/devices/system/cpu/cpu3/cpufreq/scaling_available_governors = performance powersave /sys/devices/system/cpu/cpu3/cpufreq/scaling_min_freq = 480000 [kHz] /sys/devices/system/cpu/cpu3/cpufreq/scaling_max_freq = 1920000 [kHz]  /sys/devices/system/cpu/intel_pstate/min_perf_pct = 25 [%] /sys/devices/system/cpu/intel_pstate/max_perf_pct = 100 [%] /sys/devices/system/cpu/intel_pstate/no_turbo = 0 /sys/devices/system/cpu/intel_pstate/turbo_pct = 32 [%] /sys/devices/system/cpu/intel_pstate/num_pstates = 19  x86_energy_perf_policy.cpu0 = power  x86_energy_perf_policy.cpu1 = power  x86_energy_perf_policy.cpu2 = power  x86_energy_perf_policy.cpu3 = power   /sys/module/workqueue/parameters/power_efficient = N /proc/sys/kernel/nmi_watchdog = 0  +++ Undervolting PHC kernel not available.  +++ Temperatures CPU temp = 57 [°C] Fan speed = (not available)  +++ File System /proc/sys/vm/laptop_mode = 2 /proc/sys/vm/dirty_writeback_centisecs = 6000 /proc/sys/vm/dirty_expire_centisecs = 6000 /proc/sys/vm/dirty_ratio = 20 /proc/sys/vm/dirty_background_ratio = 10  +++ Storage Devices  +++ AHCI Link Power Management (ALPM) No AHCI-enabled host controller detected.  +++ PCIe Active State Power Management /sys/module/pcie_aspm/parameters/policy = powersave  +++ Intel Graphics /sys/module/i915/parameters/enable_dc = -1 (use per-chip default) /sys/module/i915/parameters/enable_fbc = 0 (disabled) /sys/module/i915/parameters/enable_psr = -1 (use per-chip default) /sys/module/i915/parameters/modeset = -1 (use per-chip default)  +++ Wireless bluetooth = none (no device) wifi = on wwan = none (no device)  wlan0(rtl8723bs) : wifi, connected, power management = on  +++ Audio  +++ Runtime Power Management Device blacklist = (not configured) Driver blacklist = amdgpu nouveau nvidia radeon (default)  /sys/bus/pci/devices/0000:00:00.0/power/control = auto (0x060000, Host bridge, iosf_mbi_pci) /sys/bus/pci/devices/0000:00:02.0/power/control = auto (0x030000, VGA compatible controller, i915) /sys/bus/pci/devices/0000:00:03.0/power/control = auto (0x048000, Multimedia controller, no driver) /sys/bus/pci/devices/0000:00:0b.0/power/control = auto (0x118000, Signal processing controller, proc_thermal) /sys/bus/pci/devices/0000:00:14.0/power/control = auto (0x0c0330, USB controller, xhci_hcd) /sys/bus/pci/devices/0000:00:1a.0/power/control = auto (0x108000, Encryption controller, mei_txe) /sys/bus/pci/devices/0000:00:1c.0/power/control = auto (0x060400, PCI bridge, pcieport) /sys/bus/pci/devices/0000:00:1f.0/power/control = auto (0x060100, ISA bridge, lpc_ich) /sys/bus/pci/devices/0000:01:00.0/power/control = on (0xff0000, Unassigned class [ff00], rtsx_pci)  +++ USB Autosuspend = enabled Device whitelist = (not configured) Device blacklist = (not configured) Bluetooth blacklist = disabled Phone blacklist = disabled WWAN blacklist = enabled  Bus 002 Device 001 ID 1d6b:0003 control = auto, autosuspend_delay_ms = 0 -- Linux Foundation 3.0 root hub (hub) Bus 001 Device 004 ID 1a40:0101 control = auto, autosuspend_delay_ms = 0 -- Terminus Technology Inc. Hub (hub) Bus 001 Device 003 ID 6080:8060 control = on, autosuspend_delay_ms = 2000 -- <unknown> (usbhid) Bus 001 Device 002 ID 058f:5608 control = auto, autosuspend_delay_ms = 2000 -- Alcor Micro Corp. (uvcvideo) Bus 001 Device 001 ID 1d6b:0002 control = auto, autosuspend_delay_ms = 0 -- Linux Foundation 2.0 root hub (hub)  +++ Battery Status /sys/class/power_supply/axp288_fuel_gauge/manufacturer = (not available) /sys/class/power_supply/axp288_fuel_gauge/model_name = (not available) /sys/class/power_supply/axp288_fuel_gauge/cycle_count = (not supported) /sys/class/power_supply/axp288_fuel_gauge/charge_full_design = (not available)  /sys/class/power_supply/axp288_fuel_gauge/charge_full = 10015824 [mAh] /sys/class/power_supply/axp288_fuel_gauge/charge_now = 8031296 [mAh] /sys/class/power_supply/axp288_fuel_gauge/current_now = 0 [mA] /sys/class/power_supply/axp288_fuel_gauge/status = Charging  Charge = 80.2 [%]  # acpi Battery 0: Charging, 80%, charging at zero rate - will never fully charge. # upower -i $(upower -e | grep -i battery) native-path: axp288_fuel_gauge power supply: yes updated: dom 29 lug 2018 13:58:56 CEST (25 seconds ago) has history: yes has statistics: yes battery present: yes rechargeable: yes state: discharging warning-level: none energy: 34,9361 Wh energy-empty: 0 Wh energy-full: 43,5688 Wh energy-full-design: 0 Wh energy-rate: 5,13287 W voltage: 4,1 V time to empty: 6,8 hours percentage: 80% capacity: 100% technology: lithium-ion icon-name: 'battery-full-symbolic'